ProcSys
ProcSys Home Know ProcSys Leadership and Vision Enriching Culture Career Growth ProcSys Sitemap ProcSys Contact Address
Service Offerings Technology Expertise Industry Verticals Intellectual Property The Uniteam Model Alliances and Partnerships
 
 
     
Career at ProcSys
Current Openings
     
 
Current Openings Careers
ProcSys is currently hiring experienced engineers for different roles. If you are a passionate and dedicated individual and posses 2+ yrs of strong work experience in any of the following skill sets, please mark your CV to talent@procsys.com
 
 

Board Design

Experience in high speed digital / analog board design, bring up and debugging:
  -Boards with high performance processors: PowerPC / Intel Core, x86 / ARM / MIPS, Network processors, Switch fabrics, FPGAs.
  -Boards with high speed ADCs, DACs, Signal conditioning circuits, high performance micro-controllers.
Familiarity with high speed memory / peripheral interconnects: DDR3, Flash, SDIO, PCI, PCIe, USB 2/3, SPI, HDMI, DP, SATA, etc.
Familiarity with network interfaces: Ethernet / SONET / GPON / xDSL / WiFi / GSM / Bluetooth / Zigbee.
Familiarity with PCB design / simulation tools: OrCAD, Allegro / PADS / Expedition, HyperLynx.
Familiarity with hardware test equipment: High speed DSO, Logic Analyzer, Spectrum Analyzer,Network Analyzers, Traffic Generators, etc.

 

FPGA Design

Experience in design, development and verification of complex FPGAs.
RTL development in Verilog/VHDL.
Familiarity with Xilinx / Altera FPGAs.
Familiarity with Xilinx / Altera development / synthesis tools, ModelSim.
Familiarity with high speed interfaces: PCIe, SPI-4.2, SFI-4.2, Gigabit Ethernet, UTOPIA, POS PHY, USB2/3, DDR3, etc.
Familiarity with hardware test equipment: High speed DSO, Logic Analyzer, Spectrum Analyzer, Network Analyzers, Traffic Generators, etc.
Knowledge of high speed Microprocessors / Micro-controllers, L2/L3 switching, TCP/IP and other networking protocols will be advantageous.

 

Embedded Software Development

Experience in design, development, coding/porting, testing and debugging of embedded software components:
  -BSPs
  -Boot loaders (uBoot, etc)
  -Drivers
  -Diagnostics
  -Kernel mode components
  -Network protocols
  -Middleware
  -Embedded applications
Coding in C/C++, Shell Scripting, knowledge of HTML/GUI for embedded applications.
Familiarity with high performance RTOS: Embedded Linux / VxWorks / QNX / Nucleus WinCE & Other.
Familiarity with high performance processors: PowerPC / Intel Core, x86 / ARM / MIPS, Network Processors.
Familiarity with network protocols: TCP/IP, SNMP v2-v3, L2/L3 switching/routing, VLAN, VPN, RSTP, IGMP, 802.1x, GPON, etc.
Familiarity with performance testing and improvement to meet embedded system requirements.

ProcSys Copyright
ProcSys Terms of Use